Building Health Check Mold Sampling Strategy in the Indoor Environment

Molds are fungi that can be found both outdoors and indoors. They grow best in warm, damp and humid conditions. If you have damp or wet spots in your house, you will probably get mold. Mold can cause health problems. Inhaling or touching mold or mold spores may cause allergic reactions or asthma attacks in sensitive people. It can cause fungal infections. In addition, mold exposure may irritate your eyes, skin, nose, throat and lungs.

 Molds release thousands of microscopic cells called “spores”, which are lightweight, easily airborne and spread to surrounding areas through the air. Mold growth on surfaces can often be seen as a colored spot, frequently green, gray, brown, black or white. It commonly appears as a powdery, fuzzy, or hair-like material. Actively growing molds typically produce odors, sometimes described as earthy, moldy or mildew. The spores must have both food and moisture to actually start growing, similar to plant seeds.

Mold Sampling:

The method of choice for assessing potential exposures to airborne molds and mycotoxins in indoor environments involves the collection and identification of fungal propagules. Currently, there are numerous sampling methods available to measure fungal concentrations in the environment.  Source sampling, which includes methods such as swab, tape, bulk, and dust, is commonly used to identify indoor fungi.  These source sampling methods are “necessary adjuncts” to air sampling, especially when air sampling might result in false-negative findings.  

Air sampling is one of the most common methods used to assess fungal levels in indoor environments.  Many studies have related human health effects, such as increases in allergic and asthmatic respiratory symptoms, to airborne fungal spores. As the health effects of fungal exposure are mainly respiratory, air sampling is believed to be adequate to represent the exposure.  However, fungal spores have been found to exhibit varying patterns in their release into the air depending on several environmental factors.

Spatial or Location Variables:

Sampling strategies can be affected by the layout of a building or home components or zones. Therefore, the objective of sampling may be to determine whether mold spores from a damp attic are being dispersed into occupied zones. Consequently, during the inspection prior to sampling, it is important to determine whether pathways occur that would allow for transport of spores from the attic to occupied zones.

Indoor activities such as vacuum cleaner operation are known to elevate bioaerosol concentrations. Other activities such as walking around and sitting up and down on upholstered furniture can result in a “personal cloud effect” wherein the airborne particle level in other parts of the same room will be low. It may be important, therefore for the investigator to determine whether personal or area sampling is appropriate.

Temporal (Time) Variables

Sample results in a building are potentially affected by variables including human activity patterns, AHU system operation, facility operations, and climatic or seasonal variations such as alternating rainy and dry periods.

For example, sampling for culturable fungi during a prolonged dry season will be less likely to detect water indicatior fungi from leak prone envelope walls than will sampling during a rainy period when the building envelope is leaky and wet. Similarly, sampling for human shed bacteria in a office room during unoccupied nighttime hours will yield different results than will sampling in the same office room with many active occupants.

Temporal changes in the building envelope affect air sampling results. Solar heating of the building envelope causes air near perimeter walls to warm and move upward. Thus, divergent bioaerosol sampling results can occur in the morning as compared to the afternoon. In this case sampling should be repeated at least several times daily (morning and afternoon) at each testing site. Seasonal changes in moisture levels including condensation potential on the inner surface (closet to occupants) of the envelope wall can affect the ecology of molds on the wall surface and in room air. Thus, during warm, humid, seasons condensation and active mold growth can occur on the wall surface especially in depressurized buildings. However, surface and air sampling results obtained in the same areas during the heating season may be different because of the absence or dampness.

Case (Complaint) vs. Control (Non Complaint) Zones:

Establishing a baseline of the facility is essential to determining the course of action for any necessary remediation action.  The baseline will also provide invaluable information to determine the effectiveness of the remedial activity.  Occupant complaints in buildings may be environmentally based (dampness, water leaks, visible mold growth, etc.), health related (example: upper respiratory irritation, allergy, infection), or both of these. It should be recognized that results of microbial sampling alone cannot be used to determine whether adverse health outcomes have occurred.  

Additional factors to consider with regard to microbial sampling strategy in complaint/noncompliant areas include the timing of the sampling evaluation as well as the methodology to collect the samples.

The methodology used to collect samples in complaint/noncompliant zones should simulate normal occupant exposure conditions. Collection of air samples from a wall cavity in a complaint zone when wall board or other material are being aggressively disturbed (example: by drilling or pounding) does not represent normal bioaerosol exposure of room occupants unless the determination is for the identification of fungal element types within the cavity only. Interstitial wall cavity inspection can be augmented via thermography and/or specialized non-invasive cameras to visually monitor the interior components of the wall cavity.  An appropriate sampling strategy should specify “normal occupant activities and conditions” at the time of air sample collection in both complaint and non complaint areas.

Building Practitioner vs. Medical Practitioner or both:

A medical practitioner diagnosis of the respective patient is necessary to ascertain if the building occupant/patient has had building related illness (BRI).  Both the medical analyses as well as environmental analysis are essential to determining a potential cause effect relationship.  However, careful inspection of a building for dampness/moisture damage can lead to a microbial sampling strategy, the results of which can provide useful information to a physician or epidemiologist in associating environmental conditions with occupant health complaints.

Potential Health Effects of Indoor Mold:

Exposure to mold can occur when airborne mold cells, mostly spores, are inhaled. We breathe in these cells every day, indoors and out. Usually these exposures do not present a health risk. But when exposure is great, some individuals, particularly those with allergies and asthma, can experience illness that could be mild to serious or anywhere in between. The following is a description of the health problems that can be caused by exposure to mold.

• Allergic Illness: When mold cells are inhaled and land in the respiratory tract, the body's immune system's response to those invading cells can cause allergic illness. The immune system tries to destroy the mold as it would an agent, like a flu virus, that might cause infection. In a relatively small portion of the population (about 10 percent of people in the U.S.), the immune system overreacts and causes the allergic response that results in symptoms such as runny nose, scratchy throat and sneezing. Most of us know this allergic illness as "hay fever" or "allergic rhinitis."

• Asthma: Asthma is a lung disease in which the airways that carry oxygen to the lungs can partially close, causing breathing difficulties ranging from mild (such as a dry cough) to life-threatening (inability to breathe). North Carolina is in the midst of what is being called a world-wide asthma epidemic. A recent survey of North Carolina middle school children revealed that 10 percent had been diagnosed with asthma and another 17 percent had asthma symptoms that had never been diagnosed. More than half of asthmatics have respiratory allergies, often to mold. Molds can trigger asthma episodes in sensitive asthmatics.

• Infection: Some mold species can cause respiratory infection when the live mold invades the tissues of the lungs or respiratory tract. This is not a significant risk for healthy people, but can be dangerous for individuals with severely weakened immune systems.

• Toxic Effects: Very large doses of certain molds, whether inhaled or ingested, can result in poisoning caused by toxins, called mycotoxins, in the mold cells. It is not clear whether an individual can receive a high enough exposure to mold growing indoors to experience these toxic effects.

What we do?

Building Health Check is the leading specialist in the field of Indoor Environmental Quality ("IEQ") with over 600 million square feet of experience covering over 10,000 facilities nationwide.. Our Mission is to provide our clients with practical, cost-effective solutions to IEQ concerns, and help them achieve sustainable and safer indoor working and living environments.

Building Health Check/Pure air Control Services a multi-disciplinary, environmental testing, consultancy AIHA accredited lab, has a vast experience of indoor environment testing, and providing customized solutions specific for the problems encountered. This has earned Pure Air Control Services the achievement of the national Frost Sullivan Award for Frost & Sullivan Product Differentiation Innovation Award for its Solutions for Improving IAQ www.webwire.com/ViewPressRel_print.asp?aId=11722b a reputation for delivering solutions for healthy indoor environments.

Ride on the IAQ Advantage

Pure Air Control Services proven multi-disciplinary approach addresses many potential environmental and social-responsibility requirements, providing our clients with:

*  Proven combination of local know-how and environmental experience covering over 600 Millions square feet of experience in over 10,000 facilities
*  Effective and cost-efficient solutions, which meet regulatory and corporate requirements
* Single source responsibility
*  Solutions oriented approach

Need Professional IAQ Assistance?

Please feel free to contact Building health Check/Pure Air Control Services at 1-800-422-7873 or iaq@pureaircontrols.com or visit our web site at www.pureaircontrols.com if you are interested in having your indoor air tested or audited to monitor the IAQ in your home or business.  An option to having you’re your professionally evaluated is through the do-it-yourself IAQ Screen Check products at www.IndoorAirTest.com  

About Building Health Check/Pure Air Control Services:

Alan Wozniak founded Pure Air Control Services, Inc. in 1984 as a small mechanical contracting firm. Today, the IAQ work distributed from its offices in Tampa, Atlanta, West Palm Beach, Houston and Washington D.C. sets the industry standard for indoor environmental quality diagnosis and remediation. Pure Air has serviced more than 500 million square feet of indoor environments in over 10,000 facilities.

Pure Air Control Services nationally performed services include: Building Sciences Evaluation; LEED Building Assessments, Building Health Check; an AIHA accredited Environmental Microbiology Laboratory; Environmental Project Management; Duct Cleaning and Mold Remediation Services, among other indoor environmental services.

The company’s expanding client roster includes the General Services Administration (GSA); Allstate Insurance; Carrier Air Conditioning; Naval Air Warfare Center, Orlando; NAVFAC, CB Richard Ellis, Naval Air Station - King's Bay, Georgia, Federal Aviation Administration (FAA), Fortune 500 companies, school boards, and city, state, and county governments, making Pure Air Control Services a reliable IAQ industry leader.

For more information on Pure Air Services, Inc.  please contact Ed Ziegler, Vice President, at (800) 422-7873 x 804, or visit www.pureaircontrols.com.